Bravilor Installation and Training
Bravilor Bolero range installation and training package
Please note the following conditions for installation:
The site MUST:
Have the electrical supply within 1 metre of the centre line of the machine's proposed location.
Have the correct electrical supply for the ordered machine ready on site. eg, single or three phase.
Have a 15mm copper pipe mains water supply terminating with shut off valve incorporating a 3/4 inch BSP connection within 1 meter of the machine's centre line at the proposed location.
Have site water pressure within the operating range of 1~10bar. (15~150psi).
Ensure that if the counter or unit requires any holes drilling to enable the engineer to site the machine, these must be completed before the engineer arrives on site.
Ensure the machine machine is readily available to the engineer, within reasonable distance of the installation site. (Should this require any machine over 15kg lifting any distance greater than 1 meter assistance must be available).
Ensure the relevant product ingredients are to hand.
The engineeer WILL:
Unpack the machine and inspect for transit damage.
Install the machine in its proposed location connecting power and water.
Commission the machine and function test to ensure it is operating to factory specifications.
Train staff in maintenance, cleaning and operation.
Set the machine to any requirement the site may have ~ drink strength, cup size etc.
Leave the area tidy, with the packaging flat-packed for the sites disposal.
Install Brita water warranty equipment when it has been supplied with the machine.
Bravilor DOES NOT authorise its service agents to:
Change power supply cable already attached to the machine.
Connect the machine to services over 1 meter away from the machines centre line. This is due to local authority bylaws in most counties.
Modify the machines function or programming to alter the machines designed manufactured purpose.
