Instanta CTS17F Sureflow - 17Ltr Countertop Water Boiler - Built-in Filter (Old Code 3001F )

£719.00 £599.17
Product Code
3001F
In stock
Delivery
3-5 Working Days
Add to Wish List
2 Years Parts & Labour Warranty

    Instanta 3001F - Countertop Water Boiler with built in filter

    These new autofill boilers from Instanta have built in filtration for up to 13,5000 litres.
    It is suitable for most commercial catering outlets and is a compact & reliable freestanding water boiler. Made in Britain!

    • New self diagnostic system with LCD read out
    • Built-in multi filtration up to 13,500 litres
    • Adjustable filter monitor for hard, medium and soft water
    • Compact and reliable
    • Manufactured from high-grade stainless steel
    • Large non drip taps with chromed-brass spindle
    • Self priming
    • Long life incoloy element
    • Over-boil & Boil dry protection
    • Low voltage switching
    • Optional rear-drain connection
    • 1.5 metre food quality hose with 3/4" BSP female connections
    • Thermistor controlled for constant hot water temperature of 97°C
    • Easy access for service and cleaning
    • Minimal steam escape
    • Drip tray included
    • Power: 3KW
    • WRAS Approved
    • Heat up time: 42 minutes
    • Capacity: 17 litres
    • Rapid draw off in cups when full: 102
    • Dimensions: 618(H) x 310(W) x 518(D) mm depth with drip tray
    • Material: Stainless steel
    • Hourly Output: 27 litres (162 cups)
    • Tap clearance to drip tray 190mm
    • Allow up to 50mm on depth for connection
    More Information
    BrandInstanta
    Price£599.17
    Delivery3-5 Working Days
    Warranty2 Years Parts & Labour Warranty
    Weight5.0000
    Power3kW
    Dimensions308w x 518d x 618h mm
    ColourStainless Steel
    Temperature Range98 Degrees C
    Throughput Per Hour162 Litres
    Extra Specification

    Installation
    Easy to install on a stable worktop.


    Plumbing
    Designed for direct connection to a potable cold water supply using the 1.5 metre (3/4” BSP) hose supplied. An isolating valve should be installed between the supply and the heater. Rear supply connection and choice of rear (optional additional kit) or front overflow as standard.


    Electrical
    To be connected to 230 volt supply with a suitable break capacity of 13 amps.


    Construction
    Brushed stainless steel case.
    Stainless steel heating chamber.
    Low voltage switching.
    Two safety cut-outs.

    We found other products you might like!