1 Micron Inline Filter - Fits All Borg & Overstrom Models

£23.99 £19.99
Product Code
IN1013
In stock
Delivery
2-3 Working Days
Add to Wish List
1 Micron Inline Filter - Fits All Borg & Overstrom Models is available to buy in increments of 1

    1 Micron Inline Filter - Fits All Borg & Overstrom Models

    • Filter Type - Carbon Block
    • Filter Length - 10"
    • Micron Rating - 1
    • Use - Taste & Odour Reduction
    • Capacity - 9,500 litres
    • Filter / Cartridge Lifetime - Up to 9,500 litres or 6 months, whichever comes first.
    • Min. Water Temp - 2°C / 35°F
    • Max. Water Temp - 38°C / 100°F
    • Max. Working Pressure - 6.9 bar / 100 psi
    • Flow Rate - 3.8 lpm
    • Inlet / Outlet Size - 1/4" Push Fit
    • Approvals & Ccertifications - WRAS Approved

    Instructions for exchange.

    • Isolate the water supply to the machine
    • Dispense a little water to depressurise pipework
    • Release 1/4” pipework from head or existing inline filter and discard old product
    • If there is no filter to replace – cut the pipework as straight as possible in desired location using pipe cutters
    • Push 1/4” pipework into either end and ensure a tight fit
    • Return water flow to machine and observe filter to ensure pipework is secure
    • If a weep is observed or pipework comes off immediately isolate water again and refit pipework
    • Flush two full tanks (or 6-7L) from the machine to ensure any carbon dust is cleared away

     

    More Information
    BrandBorg and Overstrom
    Price£19.99
    Delivery2-3 Working Days
    ColourWhite
    Power SupplyN/A