Water Softener For Dishwashers & Glasswashers 8 litre - WS8-SK

£164.83 £137.36
Product Code
WS8-SK
In stock
Delivery
7-14 Working Days
Add to Wish List
Water Softener For Dishwashers & Glasswashers 8 litre - WS8-SK is available to buy in increments of 1

    Softener - Manual - 8 litre

    Cylinder type, 8 Litre capacity, Stainless steel construction, flexible hose fitted, No electric supply required. Typical softening capacity:1500 litres.      

    Install the water softener in rooms where the temperature is minimum 5°c and maximum 30°c   

    More Information
    BrandClasseq
    Price£137.36
    Delivery7-14 Working Days
    Weight10.0000
    Capacity8 Litre
    Dimensions415(H) x 180 (dia)
    ColourStainless Steel
    Power SupplyElectric - 13 Amp Plug In
    Extra Specification

    CONNECTION TO THE WATER MAINS (Refer to Fig 1)
    • The user must install a tap between the water mains and the water softener so that the water can
    be turned off in an emergency, plus a check valve to avoid any pressure returns.
    • Connect the water inlet and outlet hoses to the water softener and make sure these are tightened
    properly.
    • Place the drain hose directly in a drain.

    COMMISSIONING
    Rinsing of resins (Refer to Fig 2) Place the outlet hose in a drain.
    Turn the taps levers to the left and open the water inlet; let the water flow until clear, then stop the inlet water and connect the outlet hose to the machine to be supplied.

    Routine Regeneration (Refer to Fig 3)
    • Place the depression hose in a bucket. Turn the taps levers to the right and
    wait for the pressure to drop. Remove the cover by unscrewing the knob and
    then add the salt in the amount indicated to suit the model (see table 1).
    • WARNING: Remove any salt from the seal on the cover.

    Regeneration Mode (Refer to Fig 4)
    • Replace the cover and tighten the knob securely, then move the inlet tap
    lever to the left.
    • WARNING: Remove any salt from the top of the water softener.
    • Let the salty water flow from the drain hose until the water is soft (about 40
    minutes).


    Normal Operating Mode
    • Return the water softener to normal working conditions by turning the outlet
    tap lever to the left.
    • Regeneration completed.
    • WARNING: the equipment connected to the water softener is not
    supplied during regeneration.

    To ensure the efficiency of the water softener at all times, we recommend routine
    regeneration to suit the use made of the water softener and the hardness of the water used.